330 Hwy 78 W, Jasper, AL 35501 | Mon – Fri: 8 am – 5 pm
Call Us
(205) 295-5143
Call us 24/7
+08 9229 8228
330 Hwy 78 W, Jasper, AL 35501 | Mon – Fri: 8 am – 5 pm
(205) 295-5143
+08 9229 8228
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50802. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1987-1991 Toyota Camry and 1987-1999 Toyota Celica, this direct-fit catalytic converter also interchanges with OE parts 25508-74070 and 25508-74080, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50802. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1987-1991 Toyota Camry and 1987-1999 Toyota Celica, this direct-fit catalytic converter also interchanges with OE parts 25508-74070 and 25508-74080, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50802. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1987-1991 Toyota Camry and 1987-1999 Toyota Celica, this direct-fit catalytic converter also interchanges with OE parts 25508-74070 and 25508-74080, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Magnaflow HM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50802. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1987-1991 Toyota Camry and 1987-1999 Toyota Celica, this direct-fit catalytic converter also interchanges with OE parts 25508-74070 and 25508-74080, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Fitment:
Toyota Camry Base 1988
Toyota Camry Base 1989
Toyota Camry Base 1990
Toyota Camry Base 1991
Toyota Camry DLX 1987
Toyota Camry DLX 1988
Toyota Camry DLX 1989
Toyota Camry DLX 1990
Toyota Camry DLX 1991
Toyota Camry DLX 1992
Toyota Camry DLX All Trac 1988
Toyota Camry DLX All Trac 1989
Toyota Camry DLX All Trac 1990
Toyota Camry DLX All Trac 1991
Toyota Camry LE 1987
Toyota Camry LE 1988
Toyota Camry LE 1989
Toyota Camry LE 1990
Toyota Camry LE 1991
Toyota Camry LE 1992
Toyota Camry LE All Trac 1988
Toyota Camry LE All Trac 1989
Toyota Camry LE All Trac 1990
Toyota Camry LE All Trac 1991
Toyota Camry XLE 1992
Toyota Celica GT 1987
Toyota Celica GT 1988
Toyota Celica GT 1989
Toyota Celica GT 1990
Toyota Celica GT 1991
Toyota Celica GT 1992
Toyota Celica GT 1993
Toyota Celica GT 1994
Toyota Celica GT 1995
Toyota Celica GT 1996
Toyota Celica GT 1997
Toyota Celica GT 1998
Toyota Celica GT 1999
Toyota Celica GTS 1989
Toyota Celica GTS 1990
Toyota Celica GTS 1991
Toyota Celica GTS 1992
Toyota Celica GTS 1993
Toyota Celica ST 1987
Toyota Celica ST 1988
Toyota Celica ST 1989
| Weight | 5 lbs |
|---|---|
| Dimensions | 13.3 × 6.3 × 6.1 in |
| air_freight_prohibited | false |
| not_carb_approved | true |
| carb_acknowledgement_required | true |
| ltl_freight_required | false |
| prop_65 | N |
| part_type | automotive |
| epa | Compliant |
| regular_stock | false |
| units_per_sku | 1 |
| upc | 841380017406 |
| brand | Magnaflow |
| part_number | 50802 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.