330 Hwy 78 W, Jasper, AL 35501 | Mon – Fri: 8 am – 5 pm
Call Us
(205) 295-5143
Call us 24/7
+08 9229 8228
330 Hwy 78 W, Jasper, AL 35501 | Mon – Fri: 8 am – 5 pm
(205) 295-5143
+08 9229 8228
The K&N 57-3022-2 FIPK air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-3022-2 air intake comes with a K&N high-flow air filter that is mounted to a heat shield that installs into the previous air box space behind the radiator. Air is directed past the mass air sensor through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory air temperature sensor and, for vehicles equipped with an air injection, the air injection hose onto which a vent filter is attached to. The oversized oval tapered air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points. The tools needed are a screwdriver, ratchet set, knife and a wrench. K&N 57 Series FIPK’s are street legal in all 50 US states and come with K&N’s Million Mile Limited Warranty.
K&N’s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow.
Associated products: RF-1050 Universal Air Filter – Carbon Fiber Top, 99-5000 Filter Care Service Kit Aerosol
The K&N 57-3022-2 FIPK air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-3022-2 air intake comes with a K&N high-flow air filter that is mounted to a heat shield that installs into the previous air box space behind the radiator. Air is directed past the mass air sensor through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory air temperature sensor and, for vehicles equipped with an air injection, the air injection hose onto which a vent filter is attached to. The oversized oval tapered air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points. The tools needed are a screwdriver, ratchet set, knife and a wrench. K&N 57 Series FIPK’s are street legal in all 50 US states and come with K&N’s Million Mile Limited Warranty.
K&N’s easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow.
Associated products: RF-1050 Universal Air Filter – Carbon Fiber Top, 99-5000 Filter Care Service Kit Aerosol
Fitment:
Chevrolet Camaro Z28 1998
Chevrolet Camaro Z28 1999
Chevrolet Camaro Z28 2000
Chevrolet Camaro Z28 2001
Chevrolet Camaro Z28 2002
Chevrolet Camaro Z28 SS 1998
Chevrolet Camaro Z28 SS 1999
Chevrolet Camaro Z28 SS 2000
Chevrolet Camaro Z28 SS 2001
Chevrolet Camaro Z28 SS 2002
Pontiac Firebird Formula 1998
Pontiac Firebird Formula 1999
Pontiac Firebird Formula 2000
Pontiac Firebird Formula 2001
Pontiac Firebird Formula 2002
Pontiac Firebird Trans Am 1998
Pontiac Firebird Trans Am 1999
Pontiac Firebird Trans Am 2000
Pontiac Firebird Trans Am 2001
Pontiac Firebird Trans Am 2002
| Weight | 10 lbs |
|---|---|
| Dimensions | 34.6 × 13.2 × 10.7 in |
| air_freight_prohibited | false |
| not_carb_approved | false |
| carb_eo_number | D-269-20 |
| ltl_freight_required | false |
| prop_65 | Y |
| part_type | automotive |
| epa | Compliant |
| carb_acknowledgement_required | false |
| regular_stock | t |
| units_per_sku | 1 |
| upc | 024844095527 |
| brand | K&N Engineering |
| part_number | 57-3022-2 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.